certifications 000-973 test center

[Pass H12-261] Huawei HCIE R&S H12-261-ENU questions and answers| Testpassport

Testpassport Huawei HCIE R&S H12-261-ENU questions and answers is guaranteed to be 100% braindump free. We value the quality of Huawei HCIE R&S H12-261-ENU questions and answers you receive through the H12-261-ENU study guide and will never support H12-261-ENU braindumps, or any H12-261-ENU brain dump site. H12-261-ENU braindump sites cannot compare to the understanding, learning and comprehension you will gain from a non-H12-261-ENU braindumps site, based on facts and case studies, like Testpassport. Testpassport is your source for the IT Exam H12-261-ENU exam.

There are many online web sites that play an important role in providing H12-261-ENU exam resources, Huawei Certification Certified study materials (like H12-261-ENU exam notes and H12-261-ENU free practice questions etc), just to enhance your H12-261-ENU exam preparation. Testpassport H12-261-ENU expert s team has designed and prepared the training kit for H12-261-ENU HCIE-R&S (Written) (Expert – Routing & Switching). It’s designed to be relevant in today’s rapidly changing IT marketplace, H12-261-ENU training help you utilize evolving technologies, enhance your troubleshooting skills, and improve your job satisfaction.

This package includes H12-261-ENU brain dumps, Testpassport H12-261-ENU study guide, practice exams. Testpassport Huawei HCIE R&S H12-261-ENU questions and answers do not only provide information on above tools, but also give Huawei H12-261-ENU brain dumps book which help in preparation of Huawei H12-261-ENU exams. H12-261-ENU eBook is introduced for making more easy Huawei certification to concerned persons by giving all information on internet. Approaching an online Huawei HCIE R&S H12-261-ENU questions and answers or H12-261-ENU study guide is quite simple now.

Share some HCIE-R&S H12-261-ENU exam questions and answers below.
Which of the following configurations are true OSPFv3 routing aggregation configuration ? ( Multiple choice)
A. [Huawei] ospfv3 1
[Huawei-ospfv3-1] abr-summary fc00:0:0:: 48 cost 400
B. [Huawei] ospfv31
[Huawei-ospfv3-1] asbr-summary fc00:0:0:: 48 cost 20 tag 100
C. [Huawei] ospfv3 1
[Huawei-ospfv3-1] area 1
[Huawei-ospfv3-1-area-0.0.0.1] asbr-summary fc00:0:0:: 48 cost 20 tag 100
D. [Huawei] ospfv3 1
[Huawei-ospfv3-1] area 1
[Huawei-ospfv3-1-area-0.0.0.1] abr-summary fc00:0:0:: 48 cost 400
E. [Huawei] interface gigabitethernet 1/0/0
[Huawei-GigabitEthernetl/0/0] asbr-summary fc00:0:0:: 48 cost 20
F. [Huawei] interface gigabitethernet 1/0/0
[Huawei-GigabitEthernetl/0/0] abr-summary fc00:0:0:: 48 cost 400
Answer: BD

Which description about OSPF area is correct?
A. All types OSPF areas support routes brought in.
B. When the route is introduced into OSPF stub area, the route entries will turn to Class 5 LSA
C. OSPF stub area allows route redistribution, but totally stub area does not allow importing routes
D. When the route is introduced into the OSPF complete stub area, the route entries will turn to Class five LSA
E. When the route is introduced into the OSPF complete stub area, the route entries will turn to Class Seven LSA
Answer: E

auto-negotiation mode is to obtain maximum interface rate and the operating mode, the network administrator will set all Ethernet interface rate of a workgroup switch to 100Mbps, operating mode configured to full-duplex. When a NIC is configured to auto-negotiation of the workstation is connected to the switch, the outcome of consultations is that the interface rate is 100Mbps, the operating mode is half-duplex.
For this phenomenon, which of the following explanation is the most reasonable?
A. At higher port speed and operating mode, the workstation’s network interface card can¡¯t be configured to auto-negotiation
B. port rate negotiation consultations through the initial port to send FLP to negotiate, work mode does not negotiated by FLP
C. when STP in initialization will make the port enter the blocking state, leading to auto-negotiation fails, so the port should be configured to portfast
D. does not configure auto-negotiation on the switch, leading to the swtich can’t send the FLP information to the workstation, thereby causing the work station set its own oerating mode to haIf-duplex
E.problem lies in the workstation’s network card, most due to the workstation NIC drivers too old, leading to the interface on the workstation NIC learning rate and the operating mode switch configuration
Answer: D

In RIPng network, hope the router can publish a default route to the entire network, which of the following configuration is True?
A. [Huawei] ripng 1
[Huawei-ripng-1] import-route static cost 2
[Huawei-ripng-1] quit
[Huawei] ipv6 route-static:: 0 NULL0
B. [Huawei] interface GigabitEthernet0/0/1
[Huawei-GigabitEthernet0/0/1] ipv6 enable
[Huawei-GigabitEthernet0/0/1] ipv6 address 2001 £º 12::1/64
[Huawei-GigabitEthernet0/0/1] ripng 1 enable
[Huawei-GigabitEthernet0/0/1] ripng default-route originate
[Huawei-GigabitEthernet0/0/1] quit
C. [Huawei] ripng 1
[Huawei-ripng-1] import-route static cost 2
[Huawei-ripng-1] quit
[Huawei] ipv6 route-static:: 0 2001:19::9
D. [Huawei] ripng 1
[Huawei-ripng-1] ripng default-route originate
[Huawei-ripng-1] quit
Answer: B

There is a network composed by router R1, router R2, router R3 and router R4. The four routers are interconnected by a LAN network. All four routers deploy the basic OSPF. When you are executing the command “display ospf peer” on Router 2, you will find the status between Router2 and Router3 is “2-way”.
So from this output, what conclusion can you draw? (Multiple choice)
A. the router R2 is DR or BDR
B. router R3 is neither DR, nor the BDR
C. router did not form a full adjacency relationship between R2 and R3 router
D. router R2 is not DR
E. the router R4 is DR
Answer: BCD

If you participate in the IT exam, you should not hesitate to choose Testpassport Huawei HCIE R&S H12-261-ENU questions and answers. After you use, you will know that it is really good. Testpassport provide Huawei HCIE R&S H12-261-ENU questions and answers included Huawei certification H12-261-ENU exam study materials and simulation training questions and more importantly, we will provide you practice questions and answers which are very close with real certification exam.

Related Posts

, , , , , ,

Leave a Reply

Your email address will not be published. Required fields are marked *